If you have a fire or water emergency, please call us now at (303) 733-9076

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

What to Do When Water Gets Into Light Fixtures

7/30/2022 (Permalink)

Water leaking from a light fixture Have an electrician replace the flooded light fixture and flush out any remaining water from the conduits

Common Causes Of Water In Light Incidents

There's no doubt water and electricity make a lethal combination. If it happens, the result is a short circuit that can lead to electrocution or even a fire. These high stakes make it a professional-level problem that should never be attempted by an inexperienced DIYer. Here are some common causes of water in light incidents in Denver, CO:

  • Leaking roof
  • Flooding
  • Pipe bursts

Switch off Power ASAP

Switch off power at the mains, as the first thing, when you notice water in the light. The last thing you want is to touch a light switch or any dripping water before turning off the electricity. Also, most utility systems have separate circuit breakers for lighting and wall sockets, but it's good practice to turn off the master switch to kill power in both of them.
Still, do not assume there is no electricity just because you flipped a switch. Double-check the sockets with a non-contact voltmeter, to be sure.

Turn off the Water

If the leak is coming from a plumbing accident, the next cause of action should be turning off the water supply from the main valve. That should stop the leak temporarily, reducing the risk of water damage and electric shock. Typically, the main valve lives somewhere inside the house, facing the street side. Turn it counterclockwise all the way to cut off the water supply.

Call it In

Next, call a licensed plumber and electrician to fix the issue. The plumber should be able to find and fix the leak efficiently. After that, get someone to repair the ceiling damage and fix any cosmetic issues. Then have an electrician replace the flooded light fixture and flush out any remaining water from the conduits.
That said, the general idea is never to test your DIY talents with a "water in light" situation. Instead, have a reputable restoration company handle it.

Other News

View Recent Posts